Product category:
Electronics Manufacturing, Tools and Instruments
News Release from: Phoenix Contact | Subject: PPS CD M wiring duct cutter
Edited by the Engineeringtalk Editorial
Team on 26 February 2004
Cutter slices though wiring ducts and
covers
The PPS CD M wiring duct cutter slices though wiring ducts and covers up to 125mm wide and 2.5mm thick without ridges or grooves.
The PPS CD M wiring duct cutter slices though wiring ducts and covers up to 125mm wide and 2.5mm thick without ridges or grooves The 500mm-long lever and the special drive enable profiles to be cut more efficiently with a single movement
The cutter is equipped with a 1m-long, metric measuring bar containing a length stop that enables rapid, accurate settings.
The scale of the measuring bar is engraved using a laser and is therefore permanently protected against wear and tear.
The spring-loaded blade guard provides the necessary degree of safety, while further mounting options offer the demanded stability when using the cutting machine.
Its simple operation and low weight of approximately 10kg makes it an excellent tool for control cabinet construction. Request a free brochure from Phoenix Contact ...
• Phoenix Contact: contact details and other news
• Email this article to a colleague
• Register for the free Engineeringtalk email newsletter
• Engineeringtalk Home Page
Search the Pro-Talk network of sites
