Product category:
Batteries, chargers and circuit protection
News Release from: Phoenix Contact | Subject: Base terminals with integral surge protection
Edited by the Engineeringtalk Editorial
Team on 12 March 2004
Signal isolators gain built-in
protection
Phoenix Contact is extending its range of two-part IS signal isolators with the introduction of base terminals with integral surge protection.
Phoenix Contact is extending its range of two-part IS signal isolators with the introduction of base terminals with integral surge protection Surges caused by switching operations in electrical systems often cause errors, temporary interruptions to functions and possibly failure of the equipment
This article was originally published on Engineeringtalk on 11 Sep 2002 at 8.00am (UK)
Related stories
Transducers provide an easy-to-use interface
MCR-SL-PT100 temperature transducers offer a simple, convenient and exceptionally cost-effective method of interfacing Pt100 temperature transducers with instruments and control systems.
By integrating surge protection the availability of the system is increased.
The base terminal incorporates input terminals with power supply bridging, output terminals with disconnects and test points, with the optional surge protection or cold point compensation for thermocouples.
The individual channels are 12.4mm wide and are customised using plug in function modules that offer most of the standard IS isolator functions required.
The two-part IS signal isolators are part of the extensive range of Ex products available from Phoenix Contact which also includes terminals and Zone 2 power supplies.
• Phoenix Contact: contact details and other news
• Email this article to a colleague
• Register for the free Engineeringtalk email newsletter
• Engineeringtalk Home Page
Search the Pro-Talk network of sites
