Product category:
Plant- and Machine-Wide Communications
News Release from: Phoenix Contact | Subject: RAD_ISM-2400-SET-UD-ANT
Edited by the Engineeringtalk Editorial
Team on 08 April 2004
Wireless system points to remote sensors
On industrial sites there is often a requirement to connect remote sensors to the central control system.
On industrial sites there is often a requirement to connect remote sensors to the central control system To lay cables can be expensive, disruptive or even impossible due to roads, railway lines or water culverts being in the way
This article was originally published on Engineeringtalk on 6 Jun 2005 at 8.00am (UK)
Related stories
Wireless system works in hazardous areas
The Trusted Wireless system from Phoenix Contact can be installed in ATEX Zone 2 hazardous areas.
The RAD_ISM-2400-SET-UD-ANT unidirectional wireless transmission system from Phoenix Contact solves the problem.
The system provides reliable transmission of two digital and one 4-20mA analogue signal without any wires to one or more receivers.
Using the licence-exempt 2.4GHz ISM band the system is based on FHSS technology, which is capable of tolerating high levels of interference and allows multiple systems to operate in the same area.
The system can be installed quickly with no planning delays and the connection is available immediately.
A comprehensive range of antennas are available that allow a transmission range of up to 3km inside buildings or outside.
• Phoenix Contact: contact details and other news
• Email this article to a colleague
• Register for the free Engineeringtalk email newsletter
• Engineeringtalk Home Page
Search the Pro-Talk network of sites
