Product category:
Batteries, chargers and circuit protection
News Release from: Phoenix Contact | Subject: MACX MCR-SL-CAC-5-I(-UP) transducer
Edited by the Engineeringtalk Editorial
Team on 26 July 2007
Power transducer suits amperometry
The user can monitor the operating status via LEDs on the MACX MCR-SL-CAC-5-I(-UP) transducer.
Phoenix Contact is introducing a new generation of power transducers for amperometry: the MACX MCR-SL-CAC-5-I(-UP) transducer allows easy customer configuration through the front-side DIP switch The user can monitor the operating status via LEDs on the device
This article was originally published on Engineeringtalk on 11 Sep 2002 at 8.00am (UK)
Related stories
Transducers provide an easy-to-use interface
MCR-SL-PT100 temperature transducers offer a simple, convenient and exceptionally cost-effective method of interfacing Pt100 temperature transducers with instruments and control systems.
The user can also save on time and costs by implementing a flexible energy supply concept.
The transducers can be supplied with power over the mounting rail connections.
A high ambient temperature range and high over-current capacity are the distinguishing features of this product.
The power transducers convert sinusoidal alternating currents of 1A or 5A to standard analogue signals of 0 to 20mA or 4 to 20mA.
Two variants are available: a 24V DC version with 19.2 to 30V DC and a broad-range version with 19.2 to 253V AC/DC.
With the 24V DC module, users can also supply power over the mounting rails.
Thanks to the reduced wiring needs, both time and costs are saved.
The transducer is used wherever a transducer current has to be converted into a standard signal for further processing. Request a free brochure from Phoenix Contact ...
• Phoenix Contact: contact details and other news
• Email this article to a colleague
• Register for the free Engineeringtalk email newsletter
• Engineeringtalk Home Page
Search the Pro-Talk network of sites
