Product category:
Process Hardware (Pipes, Nozzles, Heaters, etc)
News Release from: ProMinent Fluid Controls (UK) | Subject: Dulcodes R UV disinfection system
Edited by the Engineeringtalk Editorial
Team on 07 November 2006
UV disinfection cleans up process water
UV disinfection system is ideally suited for the disinfection of drinking and process water and the photochemical reduction of chloramines in swimming pool water.
The new Dulcodes R UV disinfection system from ProMinent Fluid Controls is ideally suited for the disinfection of drinking and process water and the photochemical reduction of chloramines in swimming pool water It features high performance Opti-Flux low - pressure UV lamps and a built-in mechanical wiper system, which can be used without interrupting system operation
This article was originally published on Engineeringtalk on 19 Jul 2000 at 8.00am (UK)
Related stories
Extension of metering pump capacity to 1000 l/hr
The Sigma range of motor driven metering pumps from ProMinent Fluid Controls has been upgraded with the introduction of the Sigma/3.
High flow rate from piston metering pumps
Prominent's versatile Makro range of piston-type metering pumps has been extended with the introduction of the new Makro/5, which has a delivery rate of up to 40,000 l/hr
The Opt-Flux lamps use special amalgam technology, which gives increased UV output, more or less independent of temperature.
The 300W output means that maximum flow capacities can be achieved with the minimum number of lamps.
This, combined with the long service life of the lamps (up to 14,000 hours), means that lamp replacement is rarely necessary and therefore maintenance costs are significantly reduced.
Dulcodes R is available in four versions, containing one to four lamps, with a maximum flow rate of up to 438m3/h, depending on the transmission rate and dose.
The integral manually operated wiper system allows easy and efficient cleaning of the lamp protection tube even during operation, at pressures up to 10bar.
There is no need to remove the tube for cleaning.
Each lamp is equipped with two auto-adjusting wiper elements made from food-safe PTFE.
Dulcodes R features a new generation UV-C sensor with a large integrated graphical display for the sensor signal.
This allows lamp ageing, build-up of deposits on the lamp protection tube or change in water quality to be detected.
The unit's controller is freely programmable for different flushing, warning and shutdown procedures.
• ProMinent Fluid Controls (UK): contact details and other news
• Email this article to a colleague
• Register for the free Engineeringtalk email newsletter
• Engineeringtalk Home Page
Search the Pro-Talk network of sites
