Click on the advert above to visit the company web site

Product category: Form/co-ordinate, optical and vision instrumentation
News Release from: Renishaw | Subject: Touch probe systems
Edited by the Engineeringtalk Editorial Team on 01 December 2005

Touch probe systems slash inspection
times

Renishaw touch probe systems on Castle's CNC lathes have reduced inspection times from about 35min to less then 6mins.

The directors of Castle Precision have embraced the latest technology in every discipline, but not for the sake of it - this is technology applied so effectively that in some cases 'wasteful' operations have been reduced by over 80% As an example, Renishaw touch probe systems on Castle's CNC lathes have reduced inspection times from about 35min to less then 6mins

UK machining companies can learn a lot from Castle Precision - anyone who visits their plant is almost certain to feel inspired when they leave.

It is difficult to cover every high-efficiency aspect of this company in a press article of this nature, a separate article could quite easily be written on production scheduling, machining operations, time recording, computer systems, invoicing, sales contact management etc.

Renishaw has become involved with Castle, and has closely supported the company for over 20 years.

Chairman Marcus Tiefenbrun comments: "I firmly believe in the principle of building quality in, not inspecting to achieve it".

"Renishaw touch probing is central to that manufacturing philosophy and throughout our use of CNC machines we have had a close relationship with Renishaw - the flexibility and willingness to assist has always been out-standing".

In 1984 a Mori Seiki six-pallet machining centre was delivered fitted with Renishaw spindle-mounted touch probes.

Although the software was limited at that point, the probe proved extremely useful for datuming all jobs - Castle had no doubts in fitting every new machine, from that point on, with probing retrofitted by Renishaw as standard.

Spindle touch probing is well accepted on machining centres but Castle has also demonstrated how effectively it can be used on CNC lathes for set-up and inspection tasks.

Director of Engineering Alex Skinner, who, together with Marcus Tiefenbrun, has provided the inspiration behind the drive for technology, explains why this process in particular demonstrates how efficiency gains can be made.

"On one component we used to spend 35 minutes on in-process inspection - this had to be improved".

"It was manually loaded and had to stay in place, effectively part of the machining cycle, so the machine was stopped, not producing parts, for the whole of the in-cycle inspection".

"The inspectors would measure a particular thin-walled feature, decide whether or not it met specifications, pass or fail the part, and then not even record the measurements they had taken".

"We replaced this with a probe cycle, reducing the inspection cycle to about 6 minutes".

"The measurements taken are recorded in an SPC package and kept on record".

"We can tell instantly the measured dimensions of every part we have made over the last 5 years".

That's not the end of the story; Alex Skinner continues: "We decided to use the touch probe to make intelligent decisions".

"The measurements the touch probe takes are used to update offsets, these offset changes are downloaded and recorded to monitor and control the process".

"We have been able to significantly reduce human intervention, such that now each operator often runs two machines instead of one".

All machines in Castle's workshop must have probe systems; in fact it is so important that some machines have had to have the control system replaced to accommodate probing.

Touch probe systems have been adapted to four-axis machines, even to the extent of detailed examination of the mounting brackets to maximise accuracy.

Two new vertical turning lathes will be fitted with touch probing systems.

Marcus Tiefenbrun has no doubts about the impact of the touch probe systems on his business.

"The biggest benefit is the reduction - no, it would be more appropriate to say total elimination, of all offset problems".

"The second biggest is the deskilling of the operations".

"We have also found that when our customers look closely at the processes we employ they are very impressed, going away with the confidence that the process is under control".

"Quality and tight control are essential because our business is mostly 'high-end'; we don't usually get involved with low-cost parts".

"We have learnt to specialise, for example in titanium parts for a whole variety of industries, and not even attempt to compete on mundane parts with developing countries".

One vital element to running a process like this is having the skilled staff to run it.

Marcus Tiefenbrun's father ran the company before him, and believed in a strong apprenticeship scheme.

When he took over in 1994, he invested heavily in the latest machinery and control systems, but never forgot the importance of skilled people to run them, with up to 20 people at a time in training, supplemented by their college grounding.

The importance of this is further emphasised by the central role played by the project staff, all of whom have been trained internally.

Tiefenbrun explains "Expansion is limited by how many skilled people can be recruited".

"Colleges need to, and in some cases now do, invest in the latest equipment".

"Success is down to the entire process working well together ie fully integrated liaison between us and the college".

Castle's computer system has to be seen to be believed.

"System" is the correct word to use, because every company application is integrated into one program.

This system can be accessed live from any other terminal (of which there are many dotted around the company) by a real-time biometric fingerprint recognition system.

Employees have access to the information they require from the system, which includes CAD/CAM functions, production scheduling, time recording, inspection reports, invoicing, sales databases, even personnel records.

This access to information brings multiple benefits which contribute to the efficient running of the organisation.

It is very difficult to sum up a company like Castle, which has transformed itself from a 1960s company, dependant on production of low-cost parts for companies like Massey Ferguson, British Leyland and Singer (the company even made parts for the Hillman Singer gearbox), to such a specialised high-tech company.

It really comes down to three words - control, quality and efficiency. Request a free brochure from Renishaw ...

• Renishaw: contact details and other news
• Email this article to a colleague
• Register for the free Engineeringtalk email newsletter
• Engineeringtalk Home Page

Search the Pro-Talk network of sites

Put your news on Engineeringtalk  |   Advertise  |   Get the free Engineeringtalk newsletter  |   Engineeringtalk Home
About Engineeringtalk  |   Copyright © 2000-2008 Pro-Talk Ltd, UK