Visit the Igus (UK) web site

Bearings protect mine against downtime

A Revolvo product story
Edited by the Engineeringtalk editorial team Mar 16, 2007

SRB split roller bearings are replacing solid bearings on vent fans at a number of mines owned by Anglo Platinum.

The ability of Revolvo's range of SRB split roller bearings to provide safeguards against the crippling costs of downtime in continuous production environments was demonstrated recently at the Anglo Platinum Mine in South Africa.

The SRB split roller bearings are replacing solid bearings on vent fans at a number of mines owned by Anglo Platinum.

The fans are crucial to production, and with downtime costs estimated at between 10,000 South African Rand and 500,000 South African Rand per hour, the ability of the SRB split roller bearing to be installed in about one hour, compared to eight for a solid bearing, meant that these costs were minimised.

Anglo Platinum took the decision to change many of its solid bearing applications to split roller bearings due to the potential for extended downtime in the event of a bearing failure.

This decision was made easier by the fact that many of the spherical roller bearings assemblies on its fans were coming to the end of their design life.

OE Bearings, Revolvo's sole distributor in South Africa, supplied the SRB units.

Warwick Steinhobel, a Director of the company said: "Shaft ventilation at the Anglo Platinum Mines has made great advances, in terms of bearing application, thanks to the decision to make use of grease lubricated SRB split roller bearing assemblies, instead of continuing with the circulating oil-fed spherical roller bearing assemblies that were installed originally".

"From the technical, economic and pure design point of views, split roller bearings offer a host of advantages and cut downtime significantly", said Steinhobel.

"Basically, the simplicity of fitting a split roller bearing compared to a spherical roller bearing is a major factor in its longevity".

Split bearings have a longer life span because they cannot be cross-located.

They also provide superior sealing arrangements, which means longer bearing life with greatly reduced levels of maintenance.

The fact that the SRB split bearings only take about one hour to fit, as opposed to solid bearings which take eight hours, is also a major factor when you are dealing with downtime costs that can reach 500,000 South African Rand.

Fast change-out is essential and the SRB split bearings are much more efficient in this area in ensuring maximised plant up-time.

Commenting further on the technical advantages of Revolvo's SRB bearings, Steinhobel pointed out the benefits of using grease lubrication rather than oil; and the problems, in terms of bearing life, that could be overcome using SRB split bearings instead of spherical roller bearings in plummer blocks.

"Axial displacement within the plummer block housings incorporating spherical roller bearings is handled by allowing the entire bearing to slide within the housing", said Steinhobel.

"The friction between the outside diameter of the bearing, and the inner surface of the housing that must be overcome can be excessive".

"Among the problems encountered can be fretting corrosion, incorrect fits or ovality of the housing bore".

"All of these reduce bearing life".

"In fact, if a spherical roller bearing on a 100mm, 1m shaft can no longer move in its housing, a temperature increase of only 10C will be sufficient to reduce bearing life substantially: to below 50%".

The number of follow-up orders that OE Bearings has received for these bearings evidences the success of Anglo Platinum's conversion to SRB units.

To date, OE Bearings have received orders worth in excess of 900,000 South African Rand, providing split bearings for a total of 18 fans at mines that include Modikwa Platinum North and SouthShaft, revs/min Amandalbult shaft 1, two and 13 shafts, Brakspruit, Bleskop and Rustenburg Waterval East fan.

Find out more about this article. Request a brochure, download technical specifications and request samples here.
Send to a friend Send to a friend
Print this page Print this page
Bookmark this page Bookmark this page

Not what you're looking for? Search the site.

Back to top Back to top

Find out more about this article or product Arrow

Contact Revolvo

Contact Revolvo

Tel +44 1384 844000

Visit Revolvo website

Other Revolvo stories

Contact Revolvo

More stories More stories

Newsletter sign up

Request your free weekly copy of the Engineeringtalk email newsletter ...

Sign up now Sign up now

Visit the Igus (UK) web site

Browse by category

All suppliers A - Z

A Pro-talk Publication

A Pro-talk publication