Product category:
Enclosures and Equipment Cooling Fans
News Release from: Rittal | Subject: TopTherm evaporator
Edited by the Engineeringtalk Editorial
Team on 28 March 2005
Evaporator takes care of condensate
Rittal's new TopTherm evaporator is designed to be used in conjunction with an enclosure air conditioner where condensation is required to be evaporated into the ambient air.
Rittal's new TopTherm evaporator is designed to be used in conjunction with an enclosure air conditioner where condensation is required to be evaporated into the ambient air rather than allowed to drain onto the floor A simple and very effective condensate management system, based on Rittal's innovative platform design, that is installed just below the cooling units, operates on a float arrangement
Condensate is collected until a limit is reached thereby triggering a heating element, which evaporates the water back into the atmosphere.
Mounted to the side of an enclosure, the condensate evaporator is available in 230 or 115V and is produced in RAL 7035 to match the colour of existing components and is complete with wiring diagram and screws for ease of installation.
The units are available from stock ready for shipment. Request a free brochure from Rittal ...
• Rittal: contact details and other news
• Email this article to a colleague
• Register for the free Engineeringtalk email newsletter
• Engineeringtalk Home Page
Search the Pro-Talk network of sites
