Product category:
Batteries, chargers and circuit protection
News Release from: Rittal | Subject: RiLine NH
Edited by the Engineeringtalk Editorial
Team on 12 December 2007
Isolators incorporate diagnostics
On-load isolators provide safe, reliable isolation protection for downstream electrical equipment.
Rittal RiLine NH on-load isolators provide safe, reliable isolation protection for downstream electrical equipment Available either with or without fuse monitoring, the isolators range from 100 to 630A (60mm), sizes 000 to 3 and can be easily mounted directly onto Rittal's range of busbar systems
This article was originally published on Engineeringtalk on 15 Feb 2000 at 8.00am (UK)
Related stories
Mouse designed for difficult environments
Designed to function with a receiver coil instead of a ball, Rittal's new IP 67 Mouse guarantees accurate data input even under the most extreme working conditions
Using either electronic or electromechanical fuse monitoring allows quick fault diagnostics.
If a fuse blows, a signal is immediately sent to advise of the need for quick replacement without effecting plant availability.
The fitting of a microswitch indicates the switching position of the isolator lid to the control desk/room.
The cable outlet may also be swapped from the top to the bottom using the same device thereby cutting warehouse costs by up to 50%.
To prevent unintentional opening of the isolator lid, all designs have a screwdriver-operated lock as standard; the lock position may also be sealed with sealing wire if preferred.
A sliding window incorporated into the isolator lid contains a unique spring mechanism, which automatically closes the holes after voltage testing. Request a free brochure from Rittal ...
• Rittal: contact details and other news
• Email this article to a colleague
• Register for the free Engineeringtalk email newsletter
• Engineeringtalk Home Page
Search the Pro-Talk network of sites
