Product category:
Accelerometers and Vibration Sensors
News Release from: Reliability Direct | Subject: CMCP420VT
Edited by the Engineeringtalk Editorial
Team on 13 November 2002
Simple solution for vibration
measurement
The CMCP420VT is a solid-state loop-powered vibration transmitter that provides a 4-20mA output proportional to overall vibration in terms of velocity.
The CMCP420VT is a solid-state loop-powered vibration transmitter It provides a 4-20mA output that is proportional to overall vibration in terms of velocity
This article was originally published on Engineeringtalk on 30 Sep 2002 at 8.00am (UK)
Related stories
Pocket strobe lasts longer
The PK2 portable, digital stroboscope delivers superior performance and incorporates impressive new features, while remaining among the world's smallest industrial stroboscopes.
The CMCP420VT continuously monitors machinery health and transmits directly into a PLC or DCS for trending, alarm and machine shutdown.
In addition, the CMCP420VT provides access to the dynamic transducer output.
The buffered output is available for temporary connection of portable analysers for detailed machine fault analysis.
The unit is approved.
The installer simply mounts the CMCP420VT into a tapped hole in the bearing housing or machine case, connects two wires into a 4-20mA loop, and is ready to interface to a PLC or DCS.
Electrical conduit may be connected directly to the top 0.75in NPT fitting.
An optional LED display is designed to mount directly on top of the CMCP420VT two-wire loop powered transmitter.
The display is powered by the loop and no additional wires are required.
Display modules are available calibrated for ranges of 0-1 and 0-2in/s, and 0-25 and 0-50mm/s.
The unit is priced at only $395.00.
• Reliability Direct: contact details and other news
• Email this article to a colleague
• Register for the free Engineeringtalk email newsletter
• Engineeringtalk Home Page
Search the Pro-Talk network of sites
