Visit the Bosch Rexroth - Electric Drives and Controls web site
Click on the advert above to visit the company web site

Product category: Plant- and Machine-Wide Communications
News Release from: Sealevel Systems | Subject: Sealink
Edited by the Engineeringtalk Editorial Team on 18 December 2002

Easy answer to serial to Ethernet
connection

Request your FREE weekly copy of the Engineeringtalk email newsletter. News about Plant- and Machine-Wide Communications and more every issue. Click here for details.

Sealevel Systems reckons its Sealink family of serial device drivers is the easiest way to connect serial devices directly to an Ethernet network.

Sealevel Systems reckons its Sealink family of serial device drivers is the easiest way to connect serial devices directly to an Ethernet network Now, networking devices together is easier than ever, even using legacy equipment never intended to be LAN/WAN compatible

Sealink products use industry standard TCP/IP protocol allowing almost any host to access serial ports as easily as if the ports were PC cards physically installed in the host.

Available in eight-, four-, two- and one-port versions, each port can be individually configured via software as RS232, RS422 or RS485, enabling connectivity to a variety of devices including data acquisition/monitoring equipment, PLCs, and retail/point-of-sale devices.

Once connected to the network, the serial devices can be controlled and monitored over the Internet if desired.

Based on a powerful embedded microprocessor, Sealink products are able to communicate over multiple ports at sustained rates up to 230Kbit/s.

Customisation is available to offload application specific tasks, such as data collection, to the Sealink, allowing the host to periodically upload data, thereby increasing the host's performance.

Several mounting options, including DIN rail, are available for Sealink, allowing easy mounting close to the target I/O.

All Sealink products are simple to install and easy to configure.

The included software works under a wide variety of operating systems including Windows 2000, Windows NT 4.0, Windows ME, Windows 98/95, and Linux.

Standard serial operating calls are transparently redirected to the Sealink, which operates as a virtual COM port, not only guaranteeing compatibility with most serial devices, but also enabling backward compatibility with existing code.

Sealink products are available as multi-interface RS232/422/485, RS422/485, or RS232 only.

Prices begin at $299.

Eight- and four-port models are available now from stock.

Sealevel Systems: contact details and other news
Email this article to a colleague
Register for the free Engineeringtalk email newsletter
Engineeringtalk Home Page

Search the Pro-Talk network of sites

Visit the Bosch Rexroth - Electric Drives and Controls web site