Product category:
Gears, brakes, couplings and engines
News Release from: Staubli UK (Connectors) | Subject: SPC coupling
Edited by the Engineeringtalk Editorial
Team on 22 May 2002
Couplings compensate for misalignment
The novel SPC coupling from Staubli is unique in being able to compensate for misalignment on connection.
The novel SPC coupling from Staubli is unique in being able to compensate for misalignment on connection Typical uses are on machine tools for the attachment of machining or broaching heads and cooling circuit connections on plastic injection moulds
This article was originally published on Engineeringtalk on 18 Aug 2008 at 8.00am (UK)
Related stories
Air-tool swivel is all-round performer
New-generation 360-degree swivel socket offers a greatly increased work envelope for any connected tool, readily achievable with the minimum of effort.
Combined rail system supplies power and air
Rollertooline has been designed to be manufactured in 6m sections that can be readily joined together into the configuration required for any production line or workshop infrastructure.
The SPC is robust and designed for high frequency use of up to a million connections.
A form of preguiding combined with an elastic connection allows take up of misalignment between plug and socket on connection.
Misalignment of up to 0.5mm can be accommodated.
The coupling can be installed with either the plug or socket recessed into a pocket to give minimum outside dimensions, saving on space.
There are two installation options for complete integration into the machine: either floating on both sides, socket and plug installed recessed into pockets and fixed onto the machine by an elastic ring; or plug installed fixed, socket installed recessed into the pocket, the plug screwed into the machine with O-ring sealing.
The new coupling has a non-spill, flat faced design which prevents the introduction of air or dirt from the working area into the circuit.
It is compact and permits an excellent flow of fluid in both directions within minimal outside dimensions.
An important additional feature is that the coupling maintains full flow even if not fully connected.
The allowable tolerance being up to 2mm.
It is made from high resistance stainless steel and designed for use up to a maximum working pressure of 450bar.
Available in four nominal bore diameters 3, 5, 8 and 12mm, it is fitted with a fluorocarbon seal as standard, other seals can be fitted on request to suit a wide range of fluids.
The coupling is available on next day delivery to all parts of the UK. Request a free brochure from Staubli UK (Connectors) ...
• Staubli UK (Connectors): contact details and other news
• Email this article to a colleague
• Register for the free Engineeringtalk email newsletter
• Engineeringtalk Home Page
Search the Pro-Talk network of sites
