Product category:
Machine Safety Monitoring and Control
News Release from: Seaward Electronic | Subject: 800-series meters
Edited by the Engineeringtalk Editorial
Team on 30 March 2005
Test instruments aimed at Part P
requirements
To help contractors meet the requirements of the new Part P regulations, Seaward Electronic is expanding its 800 series of electrical test instruments.
To help contractors meet the requirements of the new Part P regulations, Seaward Electronic is expanding its 800 series of electrical test instruments The centrepiece of the range is the IR800 insulation and continuity tester, which complies with EN 61557, EN 1010 and all safety, environmental and EMC requirements
This article was originally published on Engineeringtalk on 10 Jul 2008 at 8.00am (UK)
Related stories
Kit eases electrical safety testing
The Seaward PAT upgrade kit provides a practical solution to enables users of PAT testers to comply with the IEE code.
Installation tester meets new wiring regulations
The ERT1557 uses a current clamp test method to provide accurate earth electrode resistance measurement without disconnecting the electrode.
The simple-to-use, handheld, battery-operated tester incorporates a number of advanced features including voltage measurements up to 1000AC or DC, a dual safety rating and robust design capable of meeting the rigorous demands of all field testing applications.
The IR800 is also supported by a range of high-specification and competitively priced multimeters and clampmeters that combine accuracy with a number of enhanced operating features.
The DM800 digital multimeter (DMM) provides accurate AC voltage measurement up to 750V and DC voltages up to 1000V.
DC current measurement is up to 6mA.
The high-specification DM800R measures AC and DC currents of up to 10A.
The CM800 clamp multimeter instrument features a 4000-count digital backlit display, with accurate AC current measurement up to 600A and AC and DC voltages up to 600V and resistance measurement up to 400ohms.
The 800 range is completed by an innovative current and voltage meter - the ET800.
This new tester uses open jaw technology for the automatic measurement of AC current up to 200A, together with AC and DC voltage to 600V and resistance within a 2000ohms range. Request a free brochure from Seaward Electronic ...
The 800 series is complemented by the Checkbox 16 handheld unit which confirms the functionality and accuracy of installation tester readings as required by NICEIC inspections.
• Seaward Electronic: contact details and other news
• Email this article to a colleague
• Register for the free Engineeringtalk email newsletter
• Engineeringtalk Home Page
Search the Pro-Talk network of sites
