Product category:
Precision Motors and Gears
News Release from: Stober Drives | Subject: MGS gearmotors
Edited by the Engineeringtalk Editorial
Team on 03 March 2003
Local assembly speeds UK gearmotor
supply
Stober Drives has set up a complete assembly line in the UK based at its head office in Waltham Abbey.
Stober Drives has set up a complete assembly line in the UK based at its head office in Waltham Abbey This UK-based assembly capability will allow Stober Drives to compete head on with the competition with reduced lead times
This article was originally published on Engineeringtalk on 31 Dec 2002 at 8.00am (UK)
Related stories
Servo takes on dynamic applications
The software for the new Posidyn SDS 4000 servo drive series is fully compatible with the vector-controlled frequency inverters of the Stober Posidrive FDS 4000 series.
The MGS C Range of helical inline geared motors are available from 0.12kW (0.21kW inverter rated) to 5.5kW (9.53kW inverter rated) with ratios of 2:1 to 250:1 (700 to 5rev/min based on four-pole motors) all from the UK assembly line.
The MGS S Range of helical worm gearmotors, which are also built on the UK assembly line, are available from 0.12kW (0.21kW inverter rated) to 9.2kW (9.53kW inverter rated) with ratios of 6:1 to 683:1 (233 to 683rev/min based on four-pole motors).
The extended range up to 45kW is available from the Germany on short lead-times.
The Stober Posidrive vector-controlled inverter matches the MGS geared motors for optimum performance, and can also be supplied from stock.
• Stober Drives: contact details and other news
• Email this article to a colleague
• Register for the free Engineeringtalk email newsletter
• Engineeringtalk Home Page
Search the Pro-Talk network of sites
