Product category:
Loadcells, Force Sensors and Torque Sensors
News Release from: Sensor Technology | Subject: TorqSense digital torque sensor
Edited by the Engineeringtalk Editorial
Team on 22 April 2008
Torque sensor maps hybrid engine
Elektro Magnetix (EMX) of Brighton developed and tested the motor-generator for Lotus Engineering's EVE (Efficient, Viable, Environmental) Hybrid.
The torque-current characteristics of a combined motor-generator developed for a Lotus-based hybrid car have been comprehensively mapped by a TorqSense digital torque sensor Elektro Magnetix (EMX) of Brighton developed and tested the motor-generator for Lotus Engineering's EVE (Efficient, Viable, Environmental) Hybrid
This is a technology demonstrator that is showcasing many of the medium term solutions that will be used to reduce vehicle emissions.
Jonathan Bremner of EMX explains that the mapping was essential, but could not be done in-house.
"We are a design house, so tend to sub-contact testing to other organisations".
"With this project we needed to plot out the full range of performance, but had only a tight time window to do all the work".
So EMX worked with a test house to design a simple yet effective test rig.
It was not long before the specialist engineers had settled on using a TorqSense torque sensor from Sensor Technology as they could design a rig around it very easily and it was very quick and simple to use.
"Normally when taking torque measurements you can spend more time fitting the transducer as they have to be mechanically coupled and use either slip rings, inducing drag, or induction coils that can have high inertia" says Bremner.
"But TorqSense is different; as it is a noncontact measurement sensor it monitors the sensor by use of a radio frequency (RF) link".
"It can be set up in moments, leaving us to concentrate on the analytical work in hand".
Because TorqSense is digital, its outputs can be fed directly into a computer, where calculations are performed automatically.
The result is highly refined information, produced in real-time, which designs out the data processing and assessment phases of the test programme.
TorqSense, made by Sensor Technology in Bicester, can be described as a plug-and-play digital torque sensor, which interrogates and analyses a radio signal from a miniature piezo electric detector on the rotating shaft being monitored.
The sensor is fully self-contained, can be set up in minutes and generates outputs that can be read locally by a technician or transmitted to computers and control systems for data analysis.
Unlike other torque sensors TorqSense is mechanically simple, with its sensors fixed to the shaft and a rotating RF antenna used to allow noncontact coupling with its digital electronics offering immunity from magnetic fields, so there is no need for complicated and delicate slip rings or large transformer assemblies to obtain signals, making it a very cost-effective, drag-free, low-inertia sensor.
Lotus Engineering believes that hybrid technology is a key route for CO2 reduction.
In the medium term it may remain more viable to integrate hybrid technologies into existing model ranges than to develop completely new vehicles.
The EVE Hybrid programme is focussed on establishing the processes for integrating hybrid technology with minimal development time and cost.
Engineers from Lotus and its parent company Proton have produced the EVE Hybrid demonstrator, based on a Proton Gen.2 compact midsize car with a 1.6 litre gasoline engine.
This currently showcases a 'micro-hybrid' start-stop system, a full parallel hybrid drive and Continuously Variable Transmission. Request a free brochure from Sensor Technology ...
• Sensor Technology: contact details and other news
• Email this article to a colleague
• Register for the free Engineeringtalk email newsletter
• Engineeringtalk Home Page
Search the Pro-Talk network of sites
