Product category:
Testing, analysing and monitoring equipment
News Release from: Systech Instruments | Subject: Series 800 online oxygen analyser
Edited by the Engineeringtalk Editorial
Team on 14 February 2003
Speedy online analysis of oxygen
The Systech Series 800 online oxygen analyser is a versatile instrument providing a very fast response to changes in the oxygen content of a process gas.
The Systech Series 800 online oxygen analyser is a versatile instrument providing a very fast response to changes in the oxygen content of a process gas The precision zirconia oxide sensor allows the instrument to measure oxygen concentration from 0.01ppm to 100% with an exceptionally fast response time of 90% of step change within 5s
This article was originally published on Engineeringtalk on 4 Jul 2002 at 8.00am (UK)
Related stories
Nitrogen controller saves soldering gas
Installing automatic control of the nitrogen atmosphere in its wave soldering plant has allowed Axis Electronics to increase productivity of assembled PCBs and reduce gas costs.
Analyser checks for oxygen leakage
Systech Instrument's oxygen permeation analysers are used at DuPont Teijin Films' Global Research Centre on Teesside to monitor the performance of Mylar packaging film.
Accuracy is better than 1% of the measured value and repeatability is 0.2%.
The advanced, user-friendly, menu driven software provides a combination of ease of use and flexibility incorporating diagnostic capability, fault alarms and read only mode.
Designed for continuous online applications, the zirconia oxide sensor is maintenance free and programmable, timed autocalibration can be to any oxygen level using ambient air or, for ISO purposes, a certified, traceable gas to meet the most demanding quality assurance regimes.
The Series 800 is insensitive to sample flow rate and unaffected by vibration or position.
The very rapid response and the large, autoranging LED display make the analyser especially easy to use and the provision of analogue outputs, high/low and fault alarms plus RS232/485 communications make the Series 800 especially suitable for process control, remote monitoring and charting applications.
Choices of sampling systems in brass/copper or stainless steel allow the installation to be matched to each application.
The Systech Series 800 zirconia oxygen analysers, available in 19in rack mount, panel/bench and NEMA 4X/IP66 water and weatherproof configurations, provide the highest levels of accuracy, reliability and flexibility under the most demanding industrial operating conditions.
• Systech Instruments: contact details and other news
• Email this article to a colleague
• Register for the free Engineeringtalk email newsletter
• Engineeringtalk Home Page
Search the Pro-Talk network of sites
