Budget pricing for air bearing tables
A
Servotechnic product story
Edited by the Engineeringtalk editorial team
Sep 10, 2004
New from Servotechnic are low-cost bespoke air bearing tables.
New from Servotechnic are low-cost bespoke air bearing tables.
The hardened worktable has total deviation of flatness, runout and parallelism, relative to the base, not exceeding 0.00015in TIR.
The standard worktable supplied has a central 5in-diameter hole.
Worktables with features to customer's specifications can be supplied to order.
A built in flotation system in the base allows the unit to be "floated" over a surface table and be precisely located by fingertip forces.
The facility can be engaged as needed by a button switch.
The units feature: a bore of 5in diameter along the spin axis, a relatively low profile of 4.45in from base to hardened worktable surface, a load carrying capacity in excess of 400lb, and a flow of 0.5scfm at 50lb/in2 supply pressure.
Tables can be run from a standard air or nitrogen bottle for approximately 6.5h, if this facility is preferred to shop air.
Not what you're looking for? Search the site.
Contact Servotechnic
Related Stories
- Motorless fan for extraction and conveying
- Datwyler develops modular distribution system
- IP69K specification for Eden E safety switches
- Push-in pneumatic fitting range has 16mm models
- Heason has ZF Industrial planetary gearboxes
Categories
- Consultancy and Services (879)
- Machine Building (4,320)
- Engineering Design Software (6,010)
- Drives, Motors and Controls (3,182)
- Small Mechanical Components, Joining, Tools (1,902)
- Control and Instrumentation (4,888)
- Monitoring, Measurement and Quality (5,205)
- Electrical and Electronic Equipment Design (4,022)
- Materials and Processing (2,832)
- Engineering Industry News, Resources (6,047)
- Powertrain Design (3,430)
- Capital Equipment (3,269)
- Sensors (6,701)
- Valves, Pumps, Process Hardware (3,509)
