Product category:
Springs, dampers, latches, locks and small components
News Release from: Stock Drive Products/Sterling Instrument | Subject: A10Z4 Finger-Flex Series
Edited by the Engineeringtalk Editorial
Team on 22 December 2005
Vibration isolators cushion shocks
A new series of six light-duty (up to 16.8kg) vibration isolators are designed to cushion shock and isolate low frequency vibration.
A new series of six light-duty (up to 16.8kg) vibration isolators from Stock Drive Products are designed to cushion shock and isolate low frequency vibration Applications include office machines, fans, blowers, pumps, air conditioners, heating plus electronic and scientific equipment
Identified as the A10Z4 Finger-Flex Series, these base-mounted units feature a natural rubber bushing and ring which are permanently mounted within a zinc plated steel housing.
The load is supported by the top surface of the 60mm square mount which has a 6.75mm clearance hole to accommodate a screw fastener from the load member.
The cup base dimensions and mounting hole pattern conform to MIL size 2 specifications.
The isolators are stocked in both 30 and 60 hardness durometers and exhibit natural frequencies of between 6 and 30Hz.
Prices start at just $7.03 in single unit quantities.
• Stock Drive Products/Sterling Instrument: contact details and other news
• Email this article to a colleague
• Register for the free Engineeringtalk email newsletter
• Engineeringtalk Home Page
Search the Pro-Talk network of sites
