DC gearmotors are reversible

Edited by the Engineeringtalk editorial team Jan 25, 2006

Three dozen DC gearmotors are reversible for low voltage applications.

Stock Drive Products has introduced 36 DC gearmotors that are reversible for low voltage applications.

The A 3Z16 units come in 3, 6 and 12V versions.

They are light, quiet motors and fully enclosed in ABS plastic.

They suit low voltage motorised display applications.

The 3.175mm shafts are made of steel.

Their no load speed ranges from 0.5 to 115rev/min and gear ratios from 4300:1 to 16:1.

The 3V version is supplied with a twist-on clip for two D size batteries (not included).

The direction of rotation is clockwise facing the shaft.

Opposite rotation is available on special order.

Tel +1 516 328 3300

SDP expands rotating component fastener range
Stock Drive Products has added two more fasteners to its range of Shaftloc products.
Adapters save on special shafting
Stainless-steel shaft adapters are high-precision devices with tight tolerances on bores, shank and bore/shank concentricity.
Magnetic attraction for clutches and couplings
Devices feature no friction or wearing parts, use no electricity and have no magnetic particles to leak.
Catalogue simplifies shaft connections
Fairloc is designed to solve phasing, timing, positioning and frequent removal problems which conventional fastening methods, such as clamps, keyways, pins or set screws, cannot properly handle.
Flexible shafts work without casings
Stock Drive Products' A7C13M and A7C13 flexible shafts are designed to operate in a manual mode and have a curvature radius ranging from 500 to 38mm.

Engineeringtalk