Product category:
Process and OEM Valves
News Release from: Sealant Equipment and Engineering | Subject: Model 2600-001-006/7
Edited by the Engineeringtalk Editorial
Team on 19 October 2006
Valve dispenses high-volume fluids
Dispense valve is designed for high flow rates and precision fluid control of level-seeking materials.
Sealant Equipment and Engineering's new Model 2600-001-006/7 Tip-Seal dispense valve is designed for high flow rates and precision fluid control of level-seeking materials It is ideal in applications requiring high-volume fluid transfer, precise level control for filling operations and dripless valve shutoff
This article was originally published on Engineeringtalk on 27 Jun 2008 at 8.00am (UK)
Related stories
Valves control mixing of adhesives and sealants
The No-Drip design feature integrates carbide ball-end needles with carbide seats for long-life dispensing of low-viscosity abrasive materials.
Meter allows precision lubrication
The Servo-Flo 401 is engineered to dispense thixotropic and cohesive materials such as one-part silicones, epoxies, urethanes and heat or ambient cure materials
The valve assembly consists of a double-acting actuator, a 350mm-long extension nozzle and a carbide Tip-Seal needle to prevent dripping fluid material at shut-off.
For high-volume fluid transfer, the Tip-Seal Valve can flow up to 22.7 litre/min with the 10.3mm orifice nozzle.
For accurate filling of housings, containers and vessels, the optional level-sensing probe and controller is used to automatically stop the flow of material when the desired fluid level is reached.
The Tip-Seal high-flow valve design dispenses single-component adhesives, sealants and lubricants such as acrylics, epoxies, polyurethanes, silicones, oils and grease.
The valve opens and closes its carbide needle to precisely start and stop material flow.
The 29:1 air-to-fluid power ratio provides instantaneous on/off control of material flow.
The valve has 0.75in-NPT fluid-inlet ports for high-volume flow of materials.
The Tip-Seal dispense valve is double-air-operated through 0.25in-NPT ports to ensure positive start and stop of material flow.
The valve includes two holes for mounting and two dowel holes for accurate positioning.
• Sealant Equipment and Engineering: contact details and other news
• Email this article to a colleague
• Register for the free Engineeringtalk email newsletter
• Engineeringtalk Home Page
Search the Pro-Talk network of sites
