Product category:
Machinery and Production Equipment
News Release from: Sealant Equipment and Engineering | Subject: Color Change Valve assemblies
Edited by the Engineeringtalk Editorial
Team on 31 May 2007
Valves control colour changes
The new line of Color Change Valve assemblies includes the No-Drip fluid valves for colour control.
Sealant Equipment and Engineering has released the 2600-019 series Color Change Valves, which improve dispensing and operating performance for the user The new line of Color Change Valve assemblies includes the No-Drip fluid valves for colour control
This article was originally published on Engineeringtalk on 27 Jun 2008 at 8.00am (UK)
Related stories
Valves control mixing of adhesives and sealants
The No-Drip design feature integrates carbide ball-end needles with carbide seats for long-life dispensing of low-viscosity abrasive materials.
Meter allows precision lubrication
The Servo-Flo 401 is engineered to dispense thixotropic and cohesive materials such as one-part silicones, epoxies, urethanes and heat or ambient cure materials
The Color Change Valve assembly consists of two or more colour valves and a flush valve which allow coloured fluids to merge into one manifold and common applicator where a selected colour is dispensed.
The manifold and applicator is flushed before each new colour is introduced.
The 2600-019 series Color Change Valves features quick-change colour and flush valves, stainless steel wetted components and carbide needles and seats in the colour and flush control valves.
The quick-change design allows replacement in less than two minutes, stainless steel materials allow use with corrosive materials and carbide components ensure longer production life.
Color Change Valve assemblies accept multi-coloured paints, coatings, epoxies, urethanes, silicones, PVCs and a wide variety of other multi-coloured fluids where one applicator is desired.
The No-Drip quick-change colour and flush valves are double air operated to ensure positive start-stop of the fluid.
Multi-coloured materials are delivered to the Color Change Valve manifold by either a metering assembly or under regulated pressure from supply tanks or pumps available from Sealant Equipment and Engineering.
• Sealant Equipment and Engineering: contact details and other news
• Email this article to a colleague
• Register for the free Engineeringtalk email newsletter
• Engineeringtalk Home Page
Search the Pro-Talk network of sites
