Product category:
Process and OEM Valves
News Release from: Sealant Equipment and Engineering | Subject: 2600-041 Series
Edited by the Engineeringtalk Editorial
Team on 21 February 2008
Valve makes clean work of dispensing
thick stuff
Dispense valve is designed for fast and clean shutoff of thixotropic and cohesive materials such as viscous silicones, epoxies and urethanes.
The 2600-041 Series Snuf-Bak dispense valve from Sealant Equipment and Engineering is designed for fast and clean shutoff of thixotropic and cohesive materials such as viscous silicones, epoxies and urethanes The all new design incorporates the company's trademark Snuf-Bak action of fluid materials in a small, compact KISS Series valve body
This article was originally published on Engineeringtalk on 27 Jun 2008 at 8.00am (UK)
Related stories
Valves control mixing of adhesives and sealants
The No-Drip design feature integrates carbide ball-end needles with carbide seats for long-life dispensing of low-viscosity abrasive materials.
Meter allows precision lubrication
The Servo-Flo 401 is engineered to dispense thixotropic and cohesive materials such as one-part silicones, epoxies, urethanes and heat or ambient cure materials
The Snuf-Bak feature provides a suction-action when the valve closes to eliminate or reduce strings and fluid drips from the dispense tip.
The new 2600-041 Snuf-Bak Dispense Valve is only 38mm square and 89mm long and is rated for 275bar.
The valve is double air actuated with two 1/8 NPT ports for a four-way pneumatic valve connection.
The divorced-design fluid body has two 1/4 NPT fluid inlet ports and a 1/4 NPT dispense port to accept a wide variety of available nozzles.
The 2600-041 dispense valve has two user features.
The body has two holes for 10 or M6 screw and two 0.25in dowel holes for accurate mounting.
The valve may be mounted to robot tooling, automation fixtures or available manual handle assemblies.
Also, the fluid suction volume can be controlled and locked in place with a set-screw adjustment.
2600-041 Snuf-Bak dispense valves are robotically, automatically and manually used to dispense single-part epoxy, urethane, silicone, PVC and acrylic for bonding, gasketting, coating, potting and filling applications in aerospace, appliance, contractor, defence, electronics, filters, marine, medical, sporting goods, automotive, truck and bus assembly dispensing applications.
• Sealant Equipment and Engineering: contact details and other news
• Email this article to a colleague
• Register for the free Engineeringtalk email newsletter
• Engineeringtalk Home Page
Search the Pro-Talk network of sites
