Product category:
Pneumatic Actuators, Motors, Accessories
News Release from: SMC Pneumatics (UK) | Subject: ACG, ARG and AWG
Edited by the Engineeringtalk Editorial
Team on 19 December 2005
Pressure gauges built into regulators
SMC launches regulators and filter regulators with built in pressure gauges.
SMC has launched regulators and filter regulators with built in pressure gauges, developed initially to achieve space savings and reduced labour costs when panel mounting These compressed air supply components have integral, non rotating, pressure gauges inside an adjustable handle eliminating the need to install separate pressure controls
This article was originally published on Engineeringtalk on 22 Aug 2006 at 8.00am (UK)
Related stories
Stainless steel fittings handle hot duties
Grease free stainless-steel fittings offer very high levels of corrosion resistance and can also be used with numerous piping materials.
The ACG, ARG and AWG units can be seen and adjusted even when mounted in difficult areas such as close to the floor or when side mounted high up a wall.
Performance can be set using limit indicators, which can be set by removing the one-touch see-through gauge cover.
The mounting angle of the gauge can be selected from four directions - 0, 90, 180 and 270deg in relation to the piping direction.
For use with air up to a maximum operating pressure of 1.0MPa, with ambient fluid temperature between -5 and +60degC, these regulators can be integrated with the firm's existing FRL units.
• SMC Pneumatics (UK): contact details and other news
• Email this article to a colleague
• Register for the free Engineeringtalk email newsletter
• Engineeringtalk Home Page
Search the Pro-Talk network of sites
