Product category:
Testing, analysing and monitoring equipment
News Release from: Smith Flow Control | Subject: Easi-Test
Edited by the Engineeringtalk Editorial
Team on 11 July 2003
Testing of actuators and valves made
easy
Easi-Test is a novel device that permits the independent testing of pneumatic actuators and process valves on live systems.
Easi-Test from Smith Flow Control is a novel device that permits the independent testing of pneumatic actuators and process valves on live systems Fitted between the valve and actuator, when activated it allows independent testing and operation of the actuator or valve
This article was originally published on Engineeringtalk on 20 Apr 2000 at 8.00am (UK)
Related stories
Innovative safety solution for valve change-over
Process safety specialist Smith Flow Control has designed an innovative interlocking system for the change-over sequence between relief valves.
Key-exchange interlocks for safe actuated valves
Whenever valves are actuated by means of pneumatic, hydraulic or electrical power sources, safety specialist Smith Flow Control (SFC) can supply custom-designed key-exchange interlocks.
Until now, function testing of actuated valves while a process was live has been extremely difficult, usually involving the simultaneous operation of both the actuator and valve.
The operation also required a mechanism to depressurise the actuator supply source.
Easi-Test overcomes these difficulties, making independent testing of both declutchable and automatically clutchable valves a simple procedure.
Operating the Easi-Test involves the introduction of a lever tool that automatically disengages the actuator from the valve stem.
The valve can then be operated like a traditional manual valve whatever the position of the actuator or the live process condition.
When the valve is declutched it can be locked in any position, allowing maintenance, function testing or changeout of the actuator without interrupting the process or compromising the process management system.
Removing the lever tool ensures the automatic re-engagement of the actuator and valve coupling when the actuator and valve next align - this either occurs automatically or on the next process trip.
Throughout the procedure the operator maintains full manual control of the valve and, while the lever tool is engaged, the valve cannot be operated remotely.
Easi-Test can easily be retrofitted and integrated into existing process systems.
The assembly mounting/interface components are 316 stainless steel investment castings, profiled to adapt to standard ISO valve topworks.
Optional extras include a removable security pin that prohibits unauthorised use of the lever tool, a remote indicator switch which detects and reports when the lever tool is engaged, and a padlock device for locking the valve in either the open or closed positions. Request a free brochure from Smith Flow Control ...
• Smith Flow Control: contact details and other news
• Email this article to a colleague
• Register for the free Engineeringtalk email newsletter
• Engineeringtalk Home Page
Search the Pro-Talk network of sites
