Product category:
Bearings
News Release from: SMB Bearings | Subject: Bearings
Edited by the Engineeringtalk Editorial
Team on 26 September 2005
Materials choice influences bearing
performance
When examining the relative advantages of chrome and stainless steel as bearing materials, it's not just about corrosion resistance.
When examining the relative advantages of chrome and stainless steel as bearing materials, it's not just about corrosion resistance Chrome steel (high carbon chromium steel) is the most commonly used steel for bearings
This article was originally published on Engineeringtalk on 15 May 2006 at 8.00am (UK)
Related stories
The role of bearing closures
Bearing closures serve to protect the inside of the bearing from contaminating particles while also helping to keep the lubricant in place.
It is harder than stainless steel so gives longer life ratings.
However it does not perform as well at higher temperatures.
Above 120C it undergoes greater dimensional changes and load capacity reduces.
Intermittent temperatures up to 150C can be tolerated, but a constant 150C or even higher would reduce bearing life.
Heat treatment will allow the bearing to cope with roughly 170C constant.
The most common grade of stainless steel for bearings is 440.
It is hardenable and tough enough to take heavy loads (about 20% less than chrome steel) but is corrosion resistant and should cope with constant temperatures of up to 250C constant and 300C intermittent.
It is often wrongly assumed that all stainless steel is nonmagnetic.
440 stainless certainly is magnetic.
It is also not completely corrosion resistant and is affected by salt water and many acids/alkalis.
316 grade is far more corrosion resistant (hence the nickname "marine grade") and nonmagnetic but much softer and can only cope with small loads and speeds.
As it is not hardenable, it cannot easily be ground so 316 bearings are semi-precision with a rougher feel.
• SMB Bearings: contact details and other news
• Email this article to a colleague
• Register for the free Engineeringtalk email newsletter
• Engineeringtalk Home Page
Search the Pro-Talk network of sites
