Product category:
Plantwide control
News Release from: Specnow | Subject: Microlink
Edited by the Engineeringtalk Editorial
Team on 10 January 2005
Software upgrades furnace performance
Morgan Advanced Ceramics has recently upgraded the vacuum brazing facility at its Rugby factory with state of the art HMIs.
Morgan Advanced Ceramics has recently upgraded the vacuum brazing facility at its Rugby factory with state of the art HMIs Faced with new product challenges, Engineering Manager Martin Davidson and Development Engineer Tariq Zaman took a critical look at their 1980s Wentgate design vacuum furnace
This article was originally published on Engineeringtalk on 8 Feb 2000 at 8.00am (UK)
Related stories
ABB supplies UPS for Scottish water plant
Electrical equipment from ABB Automation is being installed as part of a £20m programme by East of Scotland Water (ESW) to upgrade water supplies to central Scotland.
ID system lightens load for Castle Cement
Applied Weighing has developed an innovative control and instrumentation system for the UK's second largest cement producer, Castle Cement.
They concluded that it was still in very good order and in principle suitable for the next generation of ceramic to metal brazing applications.
However the temperature and vacuum profiles would require modification and the furnace was running with an early Eurotherm temperature controller.
Personnel with relevant experience of this unit were no longer available.
Morgan's engineers found they might have to relearn the programming routine themselves, but instead called on the services of control engineers Specnow to write and prove new profiles.
Process cycles employed in ceramic brazing are often critical, calling for a high degree of precision in temperature and vacuum levels.
Further reading
Flywheel-based UPS does without batteries
Eurotel Praha, the largest provider of wireless voice and data services in the Czech Republic, has selected Active Power's CleanSource technology.
Power switches keep banking systems online
HSBC's office equipment consultants specified Advance-Galatrek's latest range of dual redundant power switches for its new head office building.
Control system takes on radioactive water
Bechtel National has chosen ABB IndustrialIT as the plant wide control platform for the Department of Energy's (DOE) Hanford Waste Treatment Plant near Richland, WA.
On tackling the problem Morgan and Specnow recognised that the existing controls lacked response and flexibility, presenting obstacles to success with the new parts.
Morgan was able to make the case for purchase of Specnow's Microlink furnace control package - a touch screen Scada type solution specially designed for vacuum furnaces.
Specnow stripped out the old instrumentation on site and installed the preconfigured Microlink in less than a week.
To minimise outage the work was carried out at the same time as a major furnace service.
Zaman explained: "We had been trying to modify our historical processes but the old unit proved very user unfriendly".
"When we wanted to develop a brazing solution we had to carry out a complete run before we could evaluate".
"The Microlink allows us to modify the cycle while in progress and see the result in the load temperature distribution and vacuum levels immediately at the touch screen".
"It is an excellent tool for development; after optimising the process we can easily store as many programmes as necessary".
"The day to day operators can access them later via their own passwords".
Martin Davidson observed a number of operational advantages: "We now have software control of the process with Microlink using the average of 4 or more job thermocouples".
"This has enabled us to cut the usually long soak times at the critical braze temperature and gives us an extra run per day".
"We have achieved faster turnaround and lower reject rates".
"Another software feature gives us in-built vacuum leak detection and vacuum pump performance monitoring".
"This helps us to maintain good vacuum conditions, essential to the success and quality of our production".
"The user friendliness of the new system is also greatly appreciated: high visibility and ease of operation with the touch screen has given us greater understanding and confidence in the process".
"Specnow left us completely self sufficient, able to programme, maintain and troubleshoot the entire furnace".
"Our operators were fully trained in a matter of hours".
In designing Microlink, Specnow used a standard PC and a quality PLC to replace conventional temperature controllers, chart recorders, meters and other redundant components.
For the heart of the system software, Specnow chose DataManager, a proprietary package that can communicate with a large range of instruments and PLCs including Allen Bradley, Mitsubishi, Omron and Siemens.
With the reduced component count there is an increase in machine reliability and focus.
The operator has only one system to address and interpret, and quickly becomes proficient.
A chart screen shows changes to the program and the operator can zoom in and out of the display.
The solution obviates the need for paper rolls.
The chart can be printed at any time or exported as a csv file to be opened in Excel as part of a report.
Microlink has been supplied with new furnaces and retrofitted as an upgrade in many parts of Europe.
The units are available with options including hot zone uniformity, thermocouple, and vacuum sensor calibration.
Specnow has developed a library of friendly screens that are readily adapted to the precise needs of the customer.
Modem link and emergency support are available with contract maintenance.
• Specnow: contact details and other news
• Email this article to a colleague
• Register for the free Engineeringtalk email newsletter
• Engineeringtalk Home Page
Search the Pro-Talk network of sites
