Product category:
Electrical and Electronic Testing and PAT Equipment
News Release from: SPS Electronic UK | Subject: HA 5003L
Edited by the Engineeringtalk Editorial
Team on 03 December 2002
Safety first for high-voltage tester
The HA 5003L is a self-contained high-voltage tester housed in a 19in/4HU rack mounted case.
The HA 5003L is a self-contained high-voltage tester housed in a 19in/4HU rack mounted case An electronic source allows voltages up to 5000V AC or 6000V DC to be programmed quickly and easily
This article was originally published on Engineeringtalk on 23 May 2002 at 8.00am (UK)
Related stories
Tester does the lot for lighting manufacturers
A novel all-in-one lighting tester combines DC insulation resistance testing with functional and high-voltage flash testing to cover regulatory, safety and quality requirements in one package.
All of this is done at the required capacity of 500VA.
Depending on the application, and independent of the supply frequency, tests can be performed at 50, 60 or 400Hz.
As an option, a DC voltage output with low residual ripple is available.
The output voltages are completely potential free and the device meets EN50191 safety requirements.
New testers are designed around the same principles as the successful HA 5002L series which, have proven extremely reliable.
Because they are interface compatible, the parameters can be set with an analogue voltage of 0-10V DC, source and power supply potential free.
All of the measured values can be read back via an analogue output of 0-10V DC which is also power supply and source potential free.
If the performance of the high-voltage test has to be ensured, a minimum current value or a four-wire technique (option) can be applied.
From the 24V digital input and output signals, status conditions can be set and read.
• SPS Electronic UK: contact details and other news
• Email this article to a colleague
• Register for the free Engineeringtalk email newsletter
• Engineeringtalk Home Page
Search the Pro-Talk network of sites
