Product category:
Cabling, Conduit, Accessories and Signal Conditioning
News Release from: Sensor-Technik UK | Subject: CANbus cables
Edited by the Engineeringtalk Editorial
Team on 14 November 2002
World's first dedicated CANbus cabling
With increasing use of the CANbus system on commercial vehicles and industrial applications, Sensor-Technik UK has launched the first cable in the world to meet the SAE J1939/15 standard.
With increasing use of the CANbus system on commercial vehicles and industrial applications, Sensor-Technik UK has launched the first cable in the world to meet the international standard SAE J1939/15 Previously, most engineers working with CANbus systems have specified cable which although adequate, probably did not fully meet the recommendation and standards set by the international test and approval bodies
This article was originally published on Engineeringtalk on 26 Jun 2008 at 8.00am (UK)
Related stories
Rugged terminal suits mobile machinery
Wachendorff's Opus A1 operator terminal is PC-programmable to enable a specific set of operations to be offered to the machinery operator.
Sensor-Technik UK's new bespoke CANbus cable conforms to SAE1939/15.
It comprises an unshielded twisted pair of two 18AWG wires in the colours yellow and green, twisted lay length of less than 33mm, each core 2.7mm OD 16 x 0.253 copper.
The cabling is available simply as a pair of twisted wires, but Sensor-Technik UK can have cables made up to customer requirements to include three-wire and/or power supply wires, for example.
Complete specifications and free samples are now available. Request a free brochure from Sensor-Technik UK ...
• Sensor-Technik UK: contact details and other news
• Email this article to a colleague
• Register for the free Engineeringtalk email newsletter
• Engineeringtalk Home Page
Search the Pro-Talk network of sites
