Product category:
Temperature sensors
News Release from: System Sensor Europe | Subject: Series 200 Plus thermal sensors
Edited by the Engineeringtalk Editorial
Team on 27 October 2000
Low profile intelligent thermal
detectors
System Sensor Europe's new Series 200 Plus thermal sensors are upgraded replacements for the previous 200 Series units, available as fixed temperature only devices or as fixed plus rate-of-rise units.
System Sensor Europe's new Series 200 Plus thermal sensors are upgraded replacements for the previous 200 Series units, available as fixed temperature only devices or as fixed plus rate-of-rise units Software control allows the static operating point to be set to either the standard 58 degrees C or the higher 78 degrees C temperature, enabling two units to replace the three previous models providing the necessary software modifications are implemented in the control panel
This article was originally published on Engineeringtalk on 28 Sep 2004 at 8.00am (UK)
Related stories
Detector triggers at 78C
System Sensor Europe has extended its Vision family of conventional detectors with the introduction of a 78C fixed-temperature device.
In the superseded versions, the static temperature limit was fixed and two discrete detectors were necessary for standard and high temperature applications.
In order to guarantee full backwards compatibility, two separate versions of the fixed temperature detector will in fact be available, pre-set to either the standard or higher temperature limits, although when driven from an updated control panel, one unit will cover the two static operating points.
The new detectors have a much lower profile than the old ones, making them less obtrusive when they are installed, but in all other respects, they are transparently interchangeable with the units they replace.
• System Sensor Europe: contact details and other news
• Email this article to a colleague
• Register for the free Engineeringtalk email newsletter
• Engineeringtalk Home Page

