Product category:
Gears, brakes, couplings and engines
News Release from: Tandler Precision | Subject: R+W LK linear coupling
Edited by the Engineeringtalk Editorial
Team on 24 April 2002
Superior compensation for linear
misalignment
The R+W LK linear coupling has a patented high capacity spring system that absorbs parallel misalignment up to 0.7mm and angular misalignment up to 1.5 degrees.
The connection of linear actuators, guides, potentiometers or motors to other drive or driven elements is a critical one A high degree of alignment is required to prevent binding or wear which, if left unresolved, will substantially decrease operational efficiency and life
This article was originally published on Engineeringtalk on 26 Apr 2000 at 8.00am (UK)
Related stories
Drive protection for food and packaging
Optimum drive protection for food processing and packaging machines.
Rod ends or clevises are commonly used to address the problem but whilst they compensate to a degree for angular misalignment, neither accommodate parallel misalignment and both introduce the problem of backlash.
The optimum solution is to be found in a new introduction from Tandler Precision.
Its new R+W LK linear coupling has a patented high capacity spring system that absorbs parallel misalignment up to 0.7mm and angular misalignment up to 1.5 degrees.
The compact design of this new addition contributes to its low weight.
This results in a very low inertial load.
It also exhibits zero axial backlash under all operating conditions and provides a virtually limitless service life.
Designed for high dynamic applications with accelerations up to 300m/s2 and/or high tensile and compressive loads up to 500N, this new coupling is ideal for a range of applications.
These include the connection of linear positioning sensors, linear motors, actuators, electric and pneumatic cylinders.
The LK linear coupling is especially valuable as a superior replacement for actuator rod ends. Request a free brochure from Tandler Precision ...
• Tandler Precision: contact details and other news
• Email this article to a colleague
• Register for the free Engineeringtalk email newsletter
• Engineeringtalk Home Page
Search the Pro-Talk network of sites
