Visit the Micro-Epsilon UK web site

Vibration switches are electronic and mechanical

A Techni Measure product story
Edited by the Engineeringtalk editorial team Jul 12, 2006

Electronic and mechanical vibration switches protect critical machinery from costly failure, by initiating an alarm or shut down when excessive vibration is detected.

The IMI Sensors Division of PCB Piezotronics has introduced a range of electronic and mechanical vibration switches for protecting critical machinery from costly failure, by initiating an alarm or shut down when excessive vibration is detected.

The electronic switches require power to operate and use an input signal from an on board or remote accelerometer, whereas the mechanical switches do not require power and use the resistive force and travel of a spring as a measure of vibration amplitude.

Of particular interest is the model 686A, which is a two wire solid-state relay, electronic vibration switch that is microprocessor controlled, with no moving parts or mechanical adjustments.

This switch is supplied factory set to a selected threshold value and delay time, or can incorporate as an option a magnetic adjustable vibration threshold (MAVT) to enable adjustment of the threshold of the switch through a magnetically activated internal sensor, while it is installed on running machinery.

This switch installs using the same mounting techniques as a conventional vibration sensor and connects with a conventional two-pin connector or integral cable.

Not what you're looking for? Search the site.

Back to top Back to top

Google Ads

 

Contact Techni Measure

Related Stories

Contact Techni Measure

 

Newsletter sign up

Request your free weekly copy of the Engineeringtalk email newsletter ...

Visit the Micro-Epsilon UK web site

Articles by product category

All suppliers A - Z

A Pro-talk Publication

A Pro-talk publication