Product category:
Ballscrews, Linear Guides, Jacks, Dampers
News Release from: Danaher Motion | Subject: AccuSlide Model 2HE linear motion stage
Edited by the Engineeringtalk Editorial
Team on 09 August 2000
New ready-to-install linear motion stage
The AccuSlide Model 2HE is a low-profile, pre-engineered, pre-assembled ready-to-install linear motion stage with prealigned AccuGlide linear guides and an integral timing belt assembly.
The AccuSlide Model 2HE is a low-profile, pre-engineered, pre-assembled ready-to-install linear motion stage with prealigned AccuGlide linear guides and an integral timing belt assembly The timing belt assembly is driven through a Thomson Micron NemaTRUE True Planetary gearhead, which easily integrates with the new Thomson AXI-PAK motion control packages for a complete turnkey motion control solution
This article was originally published on Engineeringtalk on 17 May 2000 at 8.00am (UK)
Related stories
Ball screw line offers very high traverse speeds
Thomson IBL Company announces a new Rotating Nut Ball Screw Line that can increase traverse speeds up to 200 metres per minute
The Model 2HE is ideal for assembly, test and automation applications where long stroke and high speed are required.
The fully metrified AccuSlide stage provides load capacities up to 8,000 N at speeds of 3 m/s (based on a travel life of 250 km).
Other features of the AccuSlide Model 2HE include: - fully supported base up to 3m for maximum system rigidity - T-slots to provide flexible mounting arrangements - positioning accuracy better than 0,20 mm per 300 mm of length - repeatability within 0,10 mm - optional shroud cover to protect the belt drive and ways from contamination with a minimal reduction in stroke length.
• Danaher Motion: contact details and other news
• Email this article to a colleague
• Register for the free Engineeringtalk email newsletter
• Engineeringtalk Home Page
Search the Pro-Talk network of sites
