Product category:
Ballscrews, Linear Guides, Jacks, Dampers
News Release from: Danaher Motion | Subject: Cleanroom- and vacuum-compliant ballscrews
Edited by the Engineeringtalk Editorial
Team on 24 July 2002
Cleanroom- and vacuum-compliant
ballscrews
Thomson Industries has a range of cleanroom- and vacuum-compliant ballscrews that are assembled, packaged and nitrogen purged inside a laminar flow Class 10 cleanroom environment.
In response to customers whose applications are contaminant sensitive, Thomson Industries has a range of cleanroom- and vacuum-compliant ballscrews that are assembled, packaged and nitrogen purged inside a laminar flow Class 10 cleanroom environment In addition to being nitrogen purged, the assemblies are lubricated, bagged and sealed to eliminate contamination and enhance shelf life
This article was originally published on Engineeringtalk on 17 May 2000 at 8.00am (UK)
Related stories
Ball screw line offers very high traverse speeds
Thomson IBL Company announces a new Rotating Nut Ball Screw Line that can increase traverse speeds up to 200 metres per minute
The ball screws, which are ready for installation with little or no preparation, provide direct benefits to the OEM, including improved yields, throughput and uptime.
Thomson Industries can accommodate a wide range of customer requirements that cover both inch and metric sizes, preloaded and nonpreloaded ballnuts, accuracy grades, size and lead combinations, fully machined, and with/without wipers, flanges and end blocks.
Custom cleanroom hollow and telescoping screws can be designed and built.
Stainless-steel and chrome-plated assemblies are also available.
• Danaher Motion: contact details and other news
• Email this article to a colleague
• Register for the free Engineeringtalk email newsletter
• Engineeringtalk Home Page
Search the Pro-Talk network of sites
