Product category:
Stepper and Servo Drives, Motors, Controls
News Release from: Danaher Motion | Subject: Portescap P010
Edited by the Engineeringtalk Editorial
Team on 27 May 2003
Big torque from tiny stepper
The Portescap P010 is a 10mm stepper motor with 24 steps per revolution and a holding torque of 1.85mNm.
The Portescap P010 is a 10mm stepper motor with 24 steps per revolution and a holding torque of 1.85mNm Inside this compact package (10mm diameter and 16.4mm length) the motor features low inertia of 0.07mgm2 as well as boost capabilities to 265krad/s2
Holding torques of 2.6mNm, can be achieved when supplying the motor with 1.5 times the nominal current.
Due to a low detent torque this motor is ideally suited for microstep applications and its high start/stop frequency avoids the need for ramping.
This small stepper is dedicated to all applications where space is limited and accurate positioning and repeatability are prerequisites.
Applications include medical equipment, micro robots and CCTV camera systems.
• Danaher Motion: contact details and other news
• Email this article to a colleague
• Register for the free Engineeringtalk email newsletter
• Engineeringtalk Home Page
Search the Pro-Talk network of sites
