Product category:
Stepper and Servo Drives, Motors, Controls
News Release from: Total Motion Systems
Edited by the Engineeringtalk Editorial
Team on 14 January 2008
Website receives motion control upgrade
Total Motion Systems' (TMS) website now shows its complete range of products and services for the motion control industry.
Total Motion Systems' (TMS) website has been updated to show details of the company's complete range of products and services for the motion control industry TMS manufactures and supplies motion control equipment to the industrial market and produces one of the largest ranges of CE-marked industrial DC stepping motors in the world
This article was originally published on Engineeringtalk on 13 Aug 2004 at 8.00am (UK)
Related stories
Drive to optimise stepper motor performance
The ViX Microstepper is designed to optimise stepper motor performance across the speed range 0 to 50rev/s, and squeezes up to 200W shaft power from an industry standard NEMA34 frame stepper motor.
Digital servo boasts outstanding acceleration
The ViX series digital servo drive is available with power ratings of 250 or 500VA, giving continuous current ratings of 2.5 and 5.0A RMS with a motor bus voltage up to 80V DC.
These motors were originally manufactured by Stebon and are available in three frame sizes covering industry standard sizes 23, 34 and 42.
They are 200 step/rev motors and are designed to give optimum power output with two-phase bipolar drives.
The range covers holding torques up to 25Nm and the largest motors can deliver over 1kW of shaft power.
TMS stepper motors offer an improved permanent magnet rotor design to increase high-speed performance.
Their construction reduces audible noise and the electrical design allows increased duty ratings.
A high-temperature insulation system is designed for use with direct online, high-voltage drives.
TMS also manufactures geared stepper motors, brake motors for fail-safe handling and encoder motors for use in datum positioning, position tracking and encoder following applications.
TMS can also manufacture custom designs, including oil seals, special shafts and flange mounts, as well as connectors and custom lead arrangements.
Motors can also be modified for use in vacuum and radiation environments.
Outside of its own range, TMS can also source and supply stepper motors down to size 11 as well as lead screw and linear actuator motors enabling a full range of applications to be accommodated.
To complement its stepper motor offering, TMS also distributes stepper drives, servo drives and motors, controllers, rotary and linear slides and tables and operator panels enabling us to offer a single source solution to motion control applications.
• Total Motion Systems: contact details and other news
• Email this article to a colleague
• Register for the free Engineeringtalk email newsletter
• Engineeringtalk Home Page
Search the Pro-Talk network of sites
