Create full ISO 2D drawings from STL models

Edited by the Engineeringtalk editorial team Dec 6, 2001

FlashTL Engineer 2.1 enables the user to create full ISO 2D drawings from STL models, including drawing borders, title block, ISO-scales and measurements

TNO Industrial Prototyping has introduced its new FlashTL Engineer 2.1.

FlashTL Technology has been developed as a base for future Prototyping, Tooling and Rapid Manufacturing developments by TNO Industrial Prototyping and Partners.

FlashTL Engineer is the first commercial package which enables the user to create full ISO 2D drawings from STL models, including drawing borders, title block, ISO-scales and measurements.

Using this technology, STL based Prototyping, Tooling and Manufacturing can finally be fully deployed in model- and tool shop environments.

FlashTL Engineer 2.1 provides the following features: -2D ISO Drawings from STL.

-STL Splitting using Patented Intelligent Triangle Selection.

-STL Slicing to DXF.

-STL Editing.

-STL Analyzing.

-STL Reduction.

-STL Painting.

A registered version can be purchased for only Euro99,- and a demo version of FlashTL Engineer 2.1 is available at www.FlashTL.com.