Product category:
Robotics, Handling and Storage
News Release from: Techno-Sommer | Subject: SH-5 and SH-20
Edited by the Engineeringtalk Editorial
Team on 21 December 2005
Four steps for rotary actuator pair
Two rotary actuators from Techno-Sommer Automatic can rotate in four adjustable steps.
Two rotary actuators from Techno-Sommer Automatic can rotate in four adjustable steps They are for automation applications as ratchet drives for rotary tables, rotators for robot arms, opening and closing valves, tilting containers and rotating components for insertion
This article was originally published on Engineeringtalk on 4 May 2004 at 8.00am (UK)
Related stories
Pneumatic grippers handle heavy loads
The GH6 Series is a new line of long stroke parallel grippers that features a robust T-slotted jaw design for the toughest loads.
These step rotor units consists of an outer and inner vane.
The outer vane and the stop of the inner vane are a single piece.
The position of the inner vane therefore determines the position of the shaft.
Four positions may be achieved via four air inlets.
The 0.521kg smaller unit, model SH-5, has rotational angles of to 390deg at up to 240cycle/min.
Operating pressure is from 3 to7bar.
The axial and radial load are 29 and 59N, respectively.
Operating torque is 1Nm at 6bar.
The 1.137kg larger unit, model SH-20, has rotational angles up to 480deg at up to 180cycle/min.
Operating pressure is from 3 to 7bar.
The axial and radial load are 43 and 85N, respectively.
Operating torque is 3.4Nm at 6bar.
• Techno-Sommer: contact details and other news
• Email this article to a colleague
• Register for the free Engineeringtalk email newsletter
• Engineeringtalk Home Page
Search the Pro-Talk network of sites
