Product category:
Design and Development Consultancy
News Release from: TUV Rheinland UK | Subject: GOST EMC compliance
Edited by the Engineeringtalk Editorial
Team on 14 September 2004
Russian standards move towards Euro
Norms
Exporting to Russia is not impossible, but there are some rules that need to be considered.
Exporting to Russia is not impossible, but there are some rules that need to be considered Gostandard, the Russian accreditation body, requires all imported products to carry the GOST-R mark in order to show conformity with national safety standards
This article was originally published on Engineeringtalk on 22 Jan 2002 at 8.00am (UK)
Related stories
The TUV GS Mark: very different to the CE Marking
What are the differences between the TUV GS Mark and the CE Marking? Robert Falco, Director of Sales, TUV Rheinland of North America (USA) explains
Assessment cuts the risk of US safety failure
TUV International UK now offers field evaluation of unlisted equipment for export to the USA.
In addition, there are several product groups that also need hygienic approval.
Examples are products that contact water or food, such as kitchen devices and refrigerators.
According to Marina Lapina from the Russian Scientific and Research Institute for Certification, the roots of the comparably severe safety controls can be found in the early 1990s.
The Ministry of Foreign Economic Affairs of the Soviet Union used to have the monopoly on controlling imports.
But Russian Government officials claim that after this union ceased to exist, a large number of unsafe products from areas such as China and Eastern Europe entered Russia, causing a twelve-fold increase in injuries and deaths among consumers.
Consequently, in 1993 the Law on Consumer Rights Protection came into force containing detailed principles for compulsory certification.
During recent years there have been great efforts to harmonise Russian standards with international ones.
And specifically, technical legislation has also become equal or similar to the regulations within the European Union.
Examples of these changes include the new Russian EMC standards introduced in July 2004: GOST R 51317.3.2-99 and GOST R 51317.3.3-99 are identical to EN61000-3-2 and EN 61000-3-3, respectively.
GOST R 51317.3.2-99 covers "Electromagnetic compatibility of technical equipment - Harmonic current emissions (equipment input current less than 16A per phase) - Limits and test methods", and GOST R 51317.3.3-99 governs "Electromagnetic compatibility of technical equipment - Voltage fluctuation and flicker impressed on low voltage supply systems by equipment with rated current up to 16A - Limits and test methods".
These standards are applicable to electrical and electronic kitchen and domestic appliances.
Previously issued GOST certificates are not affected by this introduction, and so the expiry date remains the same.
However, products that are tested from now on need to comply with the new requirements.
• TUV Rheinland UK: contact details and other news
• Email this article to a colleague
• Register for the free Engineeringtalk email newsletter
• Engineeringtalk Home Page
Search the Pro-Talk network of sites
