Product category:
Simulation, modelling and validation software
News Release from: Vero International Software | Subject: VISI-Flow modelling software
Edited by the Engineeringtalk Editorial
Team on 23 April 2007
Moulding software meets user needs
Using VISI-Flow, DMC Mold and Tool can show real results prior to tooling
DMC Mold and Tool designs and builds moulds for the plastic injection and insert moulding industry, specialising in turn key project solutions requiring prototype through class 101 production tooling The core competency of DMC Mold and Tool begins at the front end of a project during the part design phase for manufacturability where the customer and supplier communication is most important
This article was originally published on Engineeringtalk on 3 May 2007 at 8.00am (UK)
Related stories
Software aids moulding company
Using VISI-Modelling, one of the two designers at Fassnacht determines the split line, generates all of the parting faces and produces the 3D mould design.
Software improves sportswear consistency
Unitex is now running 30 seats of Visi software including Visi-Progress, Visi-Wire and also the first license of Visi-Flow for plastic flow analysis in China.
The design and manufacturing team at DMC Mold and Tool implements tits methodology based on experience, which typically has included complex tolerance schemes, insert interchangeability, over moulding or decoration (IMD) considerations.
The company's customers are primarily custom plastic moulders, such as Nypro, Seaquist Perfect and Ironwood Industries.
Its customers include Research In Motion, Palm One, Kyocera, Whirlpool, Baxter and Cardinal Health.
Dustin Carlson is DMC Mold and Tool's President and owner.
He says highest among the challenges of designing and building moulds is maintaining customer requirements, such as adhering to their quoted cycle time along with helping to reduce runner volume while continuing to produce quality products.
Further reading
Free mode design helps bring novel bob to market
Half a plastic dustbin, a set of wheels and a cushion were the rudimentary beginnings of a project that now claims an international patent.
SolidWorks training and support in any language
Knowledge resource centre runs inside the SolidWorks interface to provide Design Solutions' customers with instant access to "on-demand" training and support content in both Dutch and French.
Consultants model novel arresting system
Project is aimed at developing new civil aircraft arresting systems for safely decelerating an aircraft that overruns a runway during landing or take off.
"Typically, we work closely with the customer to achieve these goals", says Carlson.
In 1997, DMC Mold and Tool invested in VISI-series solid moulding software from Vero International.
Jack Thompson from Solid Tooling Solutions was the sales/applications expert that made the initial visit to the facility.
Prior to his visit they had solicited a number of solid modelling software packages.
They had a similar challenge for each one of the applications experts when they arrived and Thompson's VISI-series modelling software was the only one to pass the test.
Recently, it supplemented the suite of software with VISI-Flow, new technology that helps users accurately design moulds.
The company had investigated several other programs, but again found that the VISI-Flow far out paced the competition.
Software Benefits Using VISI-series, DMC Mold and Tool users can create a full 3D model to show how a mould will be represented.
Customers can analyse the model and decide whether or not the mould will perform to their expectations.
"Prior to implementing VISI-Flow we relied on the customer's knowledge as to where to locate gates and runners, as well as gate and runner sizing" Carlson said.
The customer established runner size and location based on what they hoped would be correct.
Their expectations were to minimise scrap and maximise quality part potential.
"For many projects, we witnessed our customers struggling to establish mould specifications".
"Each customer had a go-to person who they relied on to decide the best outcome for the mould design".
"We watched as customers tried to maintain quality, cycle time and reduce production scrap".
"Projects suffered because of this traditional methodology".
"Relying on one person's expertise is not the proper way to move forward during this economic period", notes Carlson.
To remain competitive and help its customers, DMC Mold and Tool wanted to change this scenario.
Now, using VISI-Flow, DMC Mold and Tool can show them real results prior to tooling.
"We can demonstrate if there are any benefits to their runner and gate locations or what the drawbacks are based on their input".
The software provides a full recreation of what the end result will be.
VISI-Flow is much more accurate and it also depicts cycle time.
"Fill accuracy includes a timing element that will help them judge if they are meeting their required cycle time", Carlson says.
"Using traditional methodology it was a costly measure in time and money to make changes to a tool once it was built" Carlson says.
"VISI-Flow gives us the ability to make adjustments to the design in a minimal amount of time".
In today's fiercely competitive global marketplace, mould makers cannot afford mistakes.
With cost consciousness at an all-time high, DMC Mold and Tool must be able to show that it can provide more value.
Using VISI-Flow, DMC Mold and Tool can offer quality and accurate pricing.
"You have to marry everything together".
"We need the tools to achieve those end goals", Carlson adds.
Recently, DMC Mold and Tool received a mould for DANA Automotive Products Division that was insert-moulded.
An insert-moulded mould involves a stamped metal insert that is placed in the mould and plastic is over-moulded into it.
The mould was divided into two small plastic sections that were not balanced.
Carlson says, "VISI-Flow provided the information we needed to determine runner placement".
"As a result, we reduced runner size and weight, and saved on production scrap by 18%".
For another VISI-Flow project, DMC Mold and Tool was contracted to build a replacement mould for an existing mould that was not meeting the customer's capacity requirements.
At first, it worked in the field, but it quickly lost its integrity.
As expected, the customer was not satisfied with the tool and approached DMC Mold and Tool to build a replacement.
"We started the project knowing the mould did not fill correctly".
"Using VISI-Flow, we researched how to improve runners, gates and cooling".
"In doing so, we discovered a moulded-in stress situation on the part causing a fracture".
"The custom moulder had to adjust their cycle time longer than their quoted cost".
"We were able to show the customer where the moulded-in stress point was located, and we revised the gate placements and sizes".
"There was tremendous relief on the part of the customer when we provided the VISI-Flow results".
"The DMC design team's energy level soared because they knew they prevented a problem from happening", Carlson reports.
He says that establishing gate locations, gate size, runner locations and runner sizes are VISI-Flow's biggest and best performance offerings.
"The software is very powerful and fast".
"It provides customers with an in-depth depiction of the mould design".
"If we make a change, the customer can see the results of that change".
VISI-Flow also is a good sales tool for Carlson.
"Besides a good engineering tool, VISI-Flow is an excellent instrument for quoting jobs", says Carlson.
"In this constantly evolving competitive market, we need to have the right tools to satisfy our customers' needs.
We also want to pass along the benefits we are realising to our customers".
Carlson's philosophy on software learning is that it is a continuous process.
"Currently, we are only using about 50% of the software", says Carlson.
"VISI-Flow is so strong and powerful that it will be a constant learning experience".
"One of the best outcomes of installing VISI-Flow was that we were profitable right from the start as a result of using it".
"Due to our prior and ongoing use of VISI-series software, the learning curve for VISI-Flow was approximately four weeks".
"End results are only as good as the data you enter".
"If you are very thorough in data input, you will receive a more accurate result".
Thompson implemented the software and provided training.
Carlson says VISI-series and VISI-Flow support is very strong.
Vero International provides thorough online documentation and tutorials for all its products.
Carlson notes that it is helpful if users have an engineering background to use the software packages.
Vero and Solid Tooling Solutions provide 24/7 telephone support.
Carlson says the hotline support is very responsive.
The speed of analysis is dependent upon part file size.
Analysing the data can range from two to 10 hours.
"I think VISI-series and VISI-Flow are underrated software products, and new and existing customers constantly ask me 'What design software do you use?'".
" After we installed VISI-series and realised the breadth of capabilities, power and ease of use, we stopped using our other package and let the licence lapse".
"We chose to maintain and grow our VISI-series system and develop a strong relationship with Thompson at Solid Tooling Solutions and Vero International".
• Vero International Software: contact details and other news
• Email this article to a colleague
• Register for the free Engineeringtalk email newsletter
• Engineeringtalk Home Page
Search the Pro-Talk network of sites
