Magnet bases ease accelerometer fitting

Edited by the Engineeringtalk editorial team Jul 10, 2008

Magnet bases suit walk-around data collection because they allow the vibration sensor to be easily moved from point to point.

Wilcoxon Research has released the B12 and B13 magnet bases for accelerometers.

The bases have a narrow diameter for easy handling in the field and a high pull strength for reliable vibration measurements.

The B12 is a two-pole magnet base with a 22mm diameter that is suitable for accelerometers such as Wilcoxon models 786A and 780A.

Model B13 is a two-pole magnet base with a 25mm diameter that is suitable for accelerometers such as Wilcoxon models 793 and 787A.

Magnet bases suit walk-around data collection because they allow the vibration sensor to be easily moved from point to point.

When using piezoelectric sensors to measure vibration, the sensor must directly contact the machine surface.

Wilcoxon maximised the pull strength of these magnet bases to provide the most reliable measurements.

Both bases were designed with portable vibration monitoring in mind.

The two-pole magnet can be used on both flat and curved surfaces.

The bases have a narrow diameter for easy handling in the field and a knurled edge for a better grip.

The knurled edges are made up of straight ridges for easy cleaning.

The B12 and B13 magnet bases have a tapped hole that can accommodate threaded stud adapter sizes such as M6, M8, 3/8 and 10-32, providing compatibility with most industrial accelerometers.

The B12 and B13 round out Wilcoxon's offering of magnet bases for accelerometers, which now includes bases suitable for most vibration monitoring applications.