Product category:
Springs, dampers, latches, locks and small components
News Release from: JW Winco | Subject: Oil breather plugs
Edited by the Engineeringtalk Editorial
Team on 24 October 2005
Oil breather plugs are resistant to
solvents
New filler breathers are especially suitable for use on hydraulic power packs or other applications where high airflow rate can result in rapid liquid volume changes.
JW Winco can now supply oil breather plugs with and without splash guards The filler breathers are especially suitable for use on hydraulic power packs or other applications where high airflow rate can result in rapid liquid volume changes
They are made of a special orange polyamide technopolymer plastic with "oil" label, while the threaded body is black technopolymer plastic and the air filter is polyester polyurethane foam mesh.
The oil breather plugs are resistant to solvents, oils, grease and other chemical agents, and are offered in several sizes, with NPT pipe threads.
All sizes are available with or without splash guards, which are recommended in applications where agitated oil could splash against the cap.
Metric and BSPP threads are available upon request.
The oil breather plugs are rated at a continuous operating temperature up to 120C.
• JW Winco: contact details and other news
• Email this article to a colleague
• Register for the free Engineeringtalk email newsletter
• Engineeringtalk Home Page
Search the Pro-Talk network of sites
